Clik here to view.
Rend aid on paint
Anyone used it on painted bricks ? Got a small area left on a job (ocr) section of the bricks are painted , Weber said to sand as much as possible but wondered if any one has boshed it on and been ok...
View ArticleLime rendering
Hi guys Got a job coming up which is a blockwork bbq/party/summer house with large oak lintels to frame some large open openings. It is single skin blockwork laid on flat. The customer wants to use a...
View ArticleMono experience
evening chaps Anyone got any Krend, Weber etc jobs coming up? Laying up base coats - scratching up etc Keen to get some hands on - will obviously help out/get in the way for a day for nowt! I’m based...
View ArticleWeber lac basecoat
evening gents, with the Weber lac base coat i coat the gear on an bed in mesh then second coat wet on wet to achieve 6mm , my only confusion is do I rule off with a serrated spat/edge or not bother?...
View ArticleFinishing parex egi gf
I’ve got a job on using parex egi gf. I am wondering what the best procedure is to finish it because I’ve not used it before. Used plenty of monorex gf and I just rule off float with a poly float and...
View ArticleParex Scratch Render
We are pleased to announce that due to the increased demand of Parex products we have now begun stocking the GF range of Renders. We will have the following colours on the shelf for next day delivery...
View ArticleRendering company looking for work
Hi we are a small rendering company based in dorset looking for some work we are fully qualified with over 10 years experience some previous jobs on https://www.facebook.com/scsprayrender/ Thank you...
View Articlethe machine
can any one recommend the best rendering machines my heads razzeld looking thru them all
View ArticleRitmo suction
been thinking can I use hose connected to outdoor tap, connected to pump for Ritmo to keep the water pressure off the pump at Ritmo end, instead of a big water butt or can I use a suction hose ? On a...
View ArticleMapewall gpr
hi,anyone with advice on machine applied sand and cement render pls as winter is coming and we have been using mapei mapewall gpr and it's not even gone cold yet n we r sprayed on by 9.30 n having...
View ArticleAfternoon sprays yet?
As above really, its getting that tricky time of year when you risk applying in the afternoon.Going to try one tomorrow, only 35 metres in Parex and start spraying about 2pm. Bloody weathers all over...
View ArticleMono renders... what to do with the dust?
So I've been wondering, any one found uses for the sandy powdered material that covers the ground after scratching. I've saved the stuff from two jobs now, I'm thinking of making some tests using it as...
View ArticleRender carrier board
I have installed a render carrier board on a job (customer is supplying the materials) So I now need to tape the joints and have asked for the filler and tape and he says that just the ordinary joint...
View ArticleParex drying a bit patchy
Haven't used Parex a great deal but I've noticed on a couple of jobs it looks a bit patchy in places.. I've noticed this wen passing other people's jobs too. Any tips on how to prevent this? My method...
View ArticleClik here to view.
Advice pls
View attachment 20047 well, I have to admit since I started doing some domestic work I have seen things I have never imagined . That said, I need advice on how to tackle this brick work cos if it’s...
View ArticleOh dear...
.."we've had a "plasterer " do some patching outside with a tyrolean finish but aren't happy" View attachment 19419 View attachment 19420
View ArticlePlasterers 1 Stop Shop
Plasterers 1 Stop Shop - SPECIAL OFFERS Protection Tapes: Box of Black Cloth Tape (24no) @ £42.00 Each roll: £1.75 500mm x 100m Light Blue Window... Plasterers 1 Stop Shop
View Article